JOPSS - Search Results

Journal Articles

High temperature gas-cooled reactors

Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.

High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02

https://doi.org/10.1016/C2018-0-05383-9

As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950 $^{circ}$ C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.

Journal Articles

Applicability study of nuclear graphite material IG-430 to VHTR

Osaki, Hirotaka; Shimazaki, Yosuke; Sumita, Junya; Shibata, Taiju; Konishi, Takashi; Ishihara, Masahiro

Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 8 Pages, 2015/05

For the design on the VHTR graphite components, it is desirable to employ graphite material with higher strength. IG-430 graphite has been developed as an advanced candidate for VHTR. However, the new developed IG-430 does not have enough databases for the design of HTGR. In this paper, the compressive strength (Cs) of IG-430, one of important strengths for design data, is statistically evaluated. The component reliability is evaluated based on the safety factors defined by the graphite design code, and the applicability as the VHTR graphite material is discussed. It was found that IG-430 has higher strength (about 11%) and lower standard deviation (about 27%) than IG-110 which is one of traditional graphites used for HTGR, because the crack in IG-430 would not easy to propagate rather than IG-110. Since fracture probability for IG-430 is low, the higher reliability of core-component will be achieved using IG-430. It is expected that IG-430 is applicable for VHTR graphite material.

Journal Articles

JSFR design progress related to development of safety design criteria for generation IV sodium-cooled fast reactors, 3; Progress of component design

Enuma, Yasuhiro; Kawasaki, Nobuchika; Orita, Junichi*; Eto, Masao*; Miyagawa, Takayuki*

Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 6 Pages, 2015/05

In the frame work of generation IV international forum, safety design criteria and safety design guideline for the generation IV sodium-cooled fast reactors have been developing. JAEA, JAPC, MFBR have been investigating design study for JSFR to satisfy SDC. In addition to the safety measures, maintainability, reparability and manufacturability are taken into account in the JSFR design study. This paper describes the design of main components. Enlargement of the access route for the inspection devices and addition of the access routes were carried out for the reactor structure. The pump-integrated IHX was modified for the primary heat exchanger, which was installed for the decay heat removal in the IHX at the upper plenum, to be removable for improved repair and maintenance. For the steam generator, protective wall tube type design is under investigation as an option with less R&D risks.

Journal Articles

Principle design and data of graphite components

Ishihara, Masahiro; Sumita, Junya; Shibata, Taiju; Iyoku, Tatsuo; Oku, Tatsuo*

Nuclear Engineering and Design, 233(1-3), p.251 - 260, 2004/10

https://doi.org/10.1016/j.nucengdes.2004.08.012

Times Cited Count：35 Percentile：88.7(Nuclear Science & Technology)

The High Temperature Engineering Test Reactor (HTTR) constructed by Japan Atomic Energy Research Institute (JAERI) is a graphite-moderated and helium-gas-cooled reactor with prismatic fuel elements of hexagonal blocks. The reactor internal structures of the HTTR are mainly made up of graphite components. As well known, the graphite is a brittle material and there were no available design criteria for brittle materials. Therefore, JAERI had to develop the design criteria taking account of the brittle fracture behavior. In this paper, concept and key specification of the developed graphite design criteria is described, and also an outline of the quality control specified in the design criteria is mentioned.

JAEA Reports